Table of Contents
Advertisement
Extender
3. System Connection
3.1 Usage Precautions
1) System should be installed in a clean environment and has a prop temperature and
humidity.
2) All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3) All devices should be connected before power on.
3.2 System Diagram
3.3 Connection Procedure
Step1. Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of transmitter
HDBASE70POET with HDMI cable.
Step2. Connect HDBT OUT port of HDBASE70POET and HDBT IN port of
HDBASE70POER, with single CAT5e/CAT6 cable.
Step3. Connect HDMI displayer (such as HDTV) to HDMI OUT port of
HDBASE70POER with HDMI cable.
Step4. Both HDBASE70POET and HDBASE70POER have IR IN and OUT. When one
end is used as an IR receiver, the signal sent from the end can only be
transmitted via the other end.
For example: When "IR IN" of HDBASE70POET connects with an IR receiver,
the IR transmitter must connect to IR OUT of HDBASE70POER.
Step5. Connect the RS232 port of the devices to be controlled and the receiver or the
transmitter.
Step6. Connect with DC24V power adaptor(s) (One is enough if any end of
HDBASE70POET and HDBASE70POER is connected with adapter as its PoC
4 |
P a g e
INPUT
MP-WPB-8
HDMI
CAT5e
Figure 3-1 System Connection Diagram
HDMI/IR/RS232 Twisted Pair PoC
HDMI
Projector
IR Remote
Advertisement
Table of Contents
