Table of Contents
Advertisement
O
PERATION
IRC-6 Infrared Remote Control
The Intimidator Beam 355 IRC is compatible with the IRC-6 infrared remote control from Chauvet. To set
the Intimidator Beam 355 IRC to IR mode, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Run Mode.
3.
Press <ENTER>.
4.
Press <UP> or <DOWN> to select IR.
5.
Press <ENTER>.
IRC-6 Operation
The list below describes which features each button controls:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Intimidator Beam 355 IRC User Manual Rev. 1
<BLACKOUT> - Keeps shutter closed.
<AUTO> - Activates Auto mode. Use <+>, <->, or <0>–<9> to select an auto
program.
<SOUND> - Activates Sound mode.
<STROBE> - Activates Strobe control. Use <+> or <-> to increase or decrease
the strobe speed from 00 (off) to 20
<SPEED> - Sets Pan/Tilt Speed. Use <+> or <-> to increase or decrease the pan/
tilt speed from 000 (fastest) to 255 (slowest)
<SENSITIVITY> - Sets Sound Sensitivity. Use <+> or <-> to increase or decrease
the sensitivity from 001 (lowest) to 100 (highest)
<%> - Sets Dimmer value. Use <+> or <-> to widen or narrow the shutter.
<MANUAL> - Cycles through static gobos.
<FADE> - Cycles through static colors.
<R> - Sets color wheel rotation speed. Use <+> or <-> to increase or decrease
the speed from 000 (slowest) to 100 (fastest). Press <R> to toggle direction.
<G> - Sets gobo wheel rotation speed. Use <+> or <-> to increase or decrease
the speed from 000 (slowest) to 100 (fastest). Press <G> to toggle direction.
<B> - Activates Auto Color/Gobo mode.
<A> - Sets manual Pan/Tilt values. Press <A> to toggle between pan and tilt. Use
<+> or <-> to increase or decrease the pan/tilt value, from 000–255.
<W> - Sets manual Prism/Frost values. Use <+> or <-> to increase or decrease
the prism/frost value, from 000–255.
<+> - Increases a value when in a function.
<-> - Decreases a value when in a function.
<0>–<9> - Selects Auto programs 0–9.
Page 15 of 20
Advertisement
Table of Contents
