Totem Mode
To activate the Totem mode, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Totem Mode.
5.
Press <ENTER>.
6.
Use <UP> or <DOWN> to select OFF (normal range of motion), UP (upward tilt range), or DOWN
(downward tilt range).
7.
Press <ENTER>.
Reset
To reset all functions on the Intimidator Beam 355 IRC, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Reset.
5.
Press <ENTER>.
Factory Reset
To restore the Intimidator Beam 355 IRC to factory default settings, follow the instructions below:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Setup.
3.
Press <ENTER>.
4.
Use <UP> or <DOWN> to select Factory Set.
5.
Press <ENTER>.
System Information
To view the system information on the Intimidator Beam 355 IRC, do the following:
1.
Press <MENU>.
2.
Use <UP> or <DOWN> to select Sys Info.
3.
Press <ENTER>.
Page 14 of 20
Intimidator Beam 355 IRC User Manual Rev. 1
O
PERATION