CHAUVET®, upon receipt. Failure to do so in a timely manner may invalidate your claim with the carrier. In addition, keep the container and all the packing material for inspection.
Please contact the nearest authorized technical assistance center. Keep this User Manual for future consultation. If you sell the product to another user, be sure that they also receive this document. Page 4 of 11 Bubble Machine User Manual (Rev. 04)
ETUP AC Power The Bubble Machine has a fixed voltage power supply and can work with an input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the specific model. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or...
Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes section. Orientation The Bubble Machine may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging Before deciding on a location for the product, always make sure there is easy access to the product for maintenance and fluid replenishment purposes.
4. O PERATION Operation Place the Bubble Machine on a level surface and loosen the thumbscrews on the front of the unit for fluid tank access. Lift the cover. Fill the tank with bubble fluid. Note: We recommend using CHAUVET® bubble fluid (BJU) which has been specially formulated for use with CHAUVET®...
Replace blown fuse with a good one of the same type and rating Internal problem Send product for repair If you still experience problems after trying the above solutions, contact CHAUVET® Technical Support. Bubble Machine User Manual (Rev. 04) Page 9 of 11...
If you live in the UK or Ireland, contact CHAUVET® Europe Ltd.(see below). If you live in any other country, DO NOT contact CHAUVET®. Instead, contact your distributor of record. Refer to our Web site for contact details of distributors outside the US, United Kingdom, or Ireland.
Power I/O US/Worldwide UK/Europe Power Cord plug Edison (US) Local plug Thermal Maximum External Temp. 104° F (40° C) Ordering Product Name Item Code Item Number Bubble Machine 02070054 B-250 Bubble Machine User Manual (Rev. 04) Page 11 of 11...