Configuration (Standalone)
Set the product in one of the standalone modes to control without a DMX controller.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX signals
that could interfere with the DMX signals from the controller.
Automatic Programs
To run the Freedom Flex H4 IP in automatic mode, follow the instructions below.
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select an automatic program, from P 1–4.
4.
Press <ENTER>.
Auto-Program Speed
To change the auto-program speed on the Freedom Flex H4 IP, do the following:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Use <UP> or <DOWN> to increase or decrease the program speed, from S 1–100.
3.
Press <ENTER>. The product will return to the last selected mode.
Preset Color Mode
To run the Freedom Flex H4 IP on a static color, follow the instructions below.
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select a static color, from C 1–63.
4.
Press <ENTER>.
Custom Color Mixing
To custom mix a static color, do the following:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER>. and one of the following will appear:
•
r_ _ _ (red)
•
g_ _ _ (green)
•
b_ _ _ (blue)
•
A_ _ _ (amber)
•
W_ _ _ (white)
•
P_ _ _ (UV)
3.
Press <ENTER> to cycle through the color settings.
4.
When the desired color shows on the display, use <UP> or <DOWN> to increase or decrease the
color value, from 0–255.
5.
Repeat steps 3 and 4 until the product outputs as desired.
Configuration (Settings)
Dimmer Speed Mode
To change the dimmer speed on the Freedom Flex H4 IP, follow the instructions below.
1.
Press <MENU> repeatedly until dIM shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select from dIM1 (fast), dIM2 (medium), dIM3 (slow), or OFF.
4.
Press <ENTER>.
Passcode Mode
To lock the display of the Freedom Flex H4 IP, do the following:
1.
Press <MENU> repeatedly until PASS shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select ON (locks the display) or OFF (does not lock the display).
4.
Press <ENTER>.
When the display is locked, the passcode is <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>.
Page 11 of 17
Freedom Flex H4 IP X6 User Manual Rev. 2
Operation