Input / Output; Introduction - Baldor MotiFlex e100 Installation Manual

5.1 Introduction

This section describes the various digital input and output capabilities of the MotiFlex e100, with
descriptions of each of the connectors on the front panel.
The following conventions are used to refer to the inputs and outputs:
I/O . . . . . . . . . . . . . .
AIN . . . . . . . . . . . . .
DIN . . . . . . . . . . . . .
DOUT . . . . . . . . . . .
In the following sections, all connections to X2 and X3 assume stranded copper wire is used with
a temperature rating of at least 70 °C (158 °F). Use copper conductors only.
MN1943

Input / Output

Analog Input
Digital Input
Digital Output
www.baldormotion.com
Input / Output
5
Input / Output 5-1
5