Seat ibiza Owner's Manual page 198

196 If and when
– Open bonnet.
– Move retaining rod
and remove cover.
– Turn bulb carrier to the left and remove from housing
.
D
– Turn the bulb to the left and substitute it.
– To install proceed in reverse.
– Place plastic cover and secure retaining rod.
Fog lights
fig. 155 in the direction of the arrow
⇒
1
K
F
A
IBN-035
Fig. 157
fig. 156
⇒
To replace the fog light bulb do the following:
– Remove grid by unscrewing screw
on the screw side and remove cover.
– Unscrew the two light holding screws
unplug connector.
– Turn the light cover one quarter of a turn to the left.
– Unplug lamp cable.
– Unhook retaining spring from light and separate.
– Remove bulb, insert a new one in the same position and ensure
good fit.
– Press retaining spring on the light housing and engage it.
– Plug in lamp cable.
– To install cover and light follow the same steps in reverse
K
order.
IBN-036
Fig. 158
. Carefully pull on the grid
A
and, once unscrewed,
F