194
If and when
Main beam bulb
A
2
IBN-031
Fig. 151
B
IBN-032
Fig. 152
– Open bonnet.
– Move retaining rods
fig. 151
⇒
the arrows and remove cover.
– Pull out plug of the bulb cable
– Release retaining spring from bulb holder and separate.
– Remove bulb and place the new bulb in the same position as
the former bulb. Ensure good fit.
– Press retaining spring over the bulb plate and engage.
– Connect connecting cable.
– Place plastic cover and place retaining rods
– Have headlight alignment checked.
Side light bulbs
1
outwards in the direction of
2
fig. 152
.
⇒
B
.
2
K
IBN-033
Fig. 153