Siemens SIMATIC Operating Instructions Manual page 137

Insulation tested during type test with
•
•
•
•
Current consumption
•
•
•
Power loss of module
Status, Interrupts, Diagnostics
Status displays
•
•
•
Interrupts
•
Diagnostic functions
•
•
•
Sensor Supply Outputs
Number of outputs
Output voltage
•
Output current
•
•
•
•
•
Data for Selecting a Sensor **
Input voltage
•
•
•
Input current
•
Input delay
•
•
ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02
Shield and ET 200pro bus connection
ET 200pro bus connection and I/O
Shield and I/O (DIs, DOs)
Between DIs and DOs
From backplane bus
From the electronic supply (without load)
From load voltage L+ (without load)
Inputs
Outputs
Sensor supply
Diagnostic interrupt
Group fault display
Diagnostic information can be read out
I&M functionality *
Loaded
Rated value
Permissible range
Permissible aggregate current of outputs
Short-circuit protection
Operating value
Rated value
"1" signal
"0" signal
"1" signal
For "0" after "1"
For "1" after "0"
8.3 F -Switch PROFIsafe Digital Electronic Module
Technical Specifications
370 V AC / 1 min or 520 V DC / 1 min
370 V AC / 1 min or 520 V DC / 1 min
370 V AC / 1 min or 520 V DC / 1 min
370 V AC / 1 min or 520 V DC / 1 min
Max. 40 mA
50 mA
Typ. 25 mA
3 W
Two-color red/green LED per channel
Two-color red/green LED per channel
LED VsF and display via channel LEDs of
channel group
Channel LED red
Red LED (SF)
Possible
See "ET 200pro Distributed I/O" Manual
2
Min. L+ (-1.5 V)
200 mA
0 mA to 200 mA
400 mA
Yes, electronic
4 A to 9 A
24 V DC
15 V to 30 V
-30 V to 5 V
Typ. 3.5 mA
For all inputs together
Typ. 3 ms
Typ. 3 ms
Fail-Safe Electronic Modules
2.0 ms to 4.5 ms
2.0 ms to 4.5 ms
137