Touch Pad/Modem Jack/Led Sw Membrane - Toshiba Portege 2000 Maintenance Manual

4.11 Touch pad/ MODEM Jack/LED SW membrane 4 Replacement Procedures
4.11 Touch pad/ MODEM Jack/LED SW membrane
4.11.1 Touch pad
Removing the touch pad
The following describes the procedure for removing the touch pad. (See Figure 4-23,4-
24)
1. Remove the following screw and remove the latch assembly with holding the latch.
• M2×4Z
BIND screw x1
M2×4Z BIND
Figure 4-23 Removing the latch assembly
Portage 2000 Maintenance Manual (960-333) 4-33