Executing The Diagnostic Test - Toshiba Portege 2000 Maintenance Manual

3.2 Executing the Diagnostic TestExecuting the Diagnostic Test
3.2

Executing the Diagnostic Test

To start the DIAGNOSTIC PROGRAM, follow these steps:
1. Insert the test program disk (No.1) in the floppy disk drive.
2. Turn on the computer by pressing the F12 key and, select the FDD in the display for
selecting booting unit. Then press ENTER. The following menu will appear:
TOSHIBA personal computer XXXX DIAGNOSTICS
version X.XX (c) copyright TOSHIBA Corp. 20XX
DIAGNOSTICS MENU :
1 - DIAGNOSTIC TEST
2 –
3 -
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 - EXIT TO MS-DOS
NOTE: To exit the DIAGNOSTIC TEST MENU, press the [Esc] key. If a test program is
in progress, press[ Ctrl] + [Break] to exit the test program. If a test program is in
progress, press [Ctrl] + [C] to stop the test program.
Portege 2000 Maintenance Manual (960-333)
3 Tests and Diagnostics
3-3