Toshiba Portege 2000 Maintenance Manual page 135

3.19 Log Utilities
3.19.2 Operations
Selecting 5-LOG UTILITIES and pressing Enter in the DIAGNOSTIC MENU logs error
information into RAM or onto a floppy disk. The error information is displayed in the
following format:
0003 ERRORS
CNT TS-No PASS STS
001 FDD 01 0000 110
002 FDD 01 0001 110
003 FDD 03 0003 110
Pass count
Subtest number
Test name
Error count
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
2. The error information displayed on the screen can be manipulated by the following
number keys:
The 1 key scrolls the display to the next page.
The 2 key scrolls the display to the previous page.
The 3 key returns to the Diagnostic Menu.
The 4 key erases all error log information in RAM.
The 5 key outputs the error log information to a printer.
The 6 key reads the log information from a floppy disk.
The 7 key writes the log information to a floppy disk.
3. In the case of "error retry OK," a capital "R" will be placed at the beginning of the
error status. However, it is not added to the error count.
Portege 2000 Maintenance Manual (960-333)
ADDR
24015
30108
23106
FDD/HDD or
memory address
Error status
WD RD HSTS [ERROR STATUS NAME]
00 00 FDD-CRC ERROR
00 00 FDD-CRC ERROR
00 00 FDD-CRC ERROR
HDC status
Read data
Write data
3 Tests and Diagnostics
Error status name
3-45