Toshiba Portege 2000 Maintenance Manual page 173

4.5 Keyboard/Bottom cover
Installing the bottom cover
The following describes the procedure for installing the bottom cover. (See Figure 4-10,4-
11)
1. Turn over the computer and install the bottom cover from the IO connector side
first.
2. Secure the following screws.
• M2.5×6B
• M2×6B
• M2×4B
• M2×4Z
3. Turn the computer face it up and secure the following screws.
• M2×4S
4. Connect the following cables to the connector of the main board.
PJ9, PJ8, PJ334, PJ7
Portage 2000 Maintenance Manual (960-333)
FLAT BIND screw
BIND screw
BIND screw
S-THIN HEAD screw
S-THIN HEAD screw
4 Replacement Procedures
x2
x8
x2
x1
x6
4-21