Toshiba Portege 2000 Maintenance Manual page 200

4 Replacement Procedures
2. Remove the following screws fixing the both sides of the hinge.
• M2×3S
Installing the LCD cover hinge
The following describes the procedure for installing the LCD cover hinge. (See Figure 4-
37,4-38)
1. Install the both sides of the hinge and secure them with the following screws.
• M2×3S
2. Install the palm rest cover and secure it with the following screws.
• M2.5×5Z
4-48
S-THIN HEAD screw
Figure 4-38 Removing the LCD cover hinge
S-THIN HEAD screw
BIND screw
x2
M2×3S S-THIN HEAD
x2
x2
Portage 2000 Maintenance Manual (960-333)
4.14 Hinge