Toshiba Portege 2000 Maintenance Manual page 195

4.13 LCD mask/FL inverter/LCD/LCD cable
4.13.2 FL inverter
Removing the FL inverter
The following describes the procedure for removing the FL inverter. (See Figure 4-33)
1. Remove the following screw fixing the FL inverter.
• M2×3S
2. Disconnect the both sides of the cable and remove the FL inverter.
Installing the FL inverter
The following describes the procedure for installing the FL inverter. (See Figure 4-33)
1. Connect the both sides of the cable and install the FL inverter.
2. Install the following screw to fix the FL inverter.
• M2×3S
Portage 2000 Maintenance Manual (960-333)
S-THIN HEAD screw
M2×3S S-THIN HEAD
Cable
Figure 4-33 Removing the FL inverter
S-THIN HEAD screw
4 Replacement Procedures
x1
FL inverter
x1
4-43