Toshiba Portege 2000 Maintenance Manual page 197

4.13 LCD mask/FL inverter/LCD/LCD cable
4.13.4 LCD cable
Removing the LCD cable
The following describes the procedure for removing the LCD cable. (See Figure 4-35,4-
36)
1. Remove the following screw fixing the LCD cable holder.
• M2×4Z
2. Remove the following screw.
• M4×5Z
3. Peel off the four glass tapes and remove the LCD cable
Portage 2000 Maintenance Manual (960-333)
S-THIN HEAD screw
Figure 4-35 Removing the LCD cable holder
BIND screw
LCD cable
Figure 4-36 Removing the screw
4 Replacement Procedures
x1
M2×4Z S-THIN HEAD
x1
M4×5Z BIND
Glass tape
4-45