Toshiba Portege 2000 Maintenance Manual page 190

4 Replacement Procedures
2. Open the display cover and remove the following screws fixing the membrane and
the power membrane SW.
• M2×3S
M2×3S S-THIN HEAD
Figure 4-28 Removing the power membrane SW
Installing the power membrane SW
The following describes the procedure for installing the power membrane SW. (See
Figure 4-27,4-28)
1. Close the display cover and secure the following screw and the plastic holder to
fix the membrane to the hole. Also install the SW.
• M2×4Z
2. Open the display cover and secure the following screws to fix the membrane.
• M2×3S
4-38
4.12 Power membrane SW/Wireless LAN antenna
S-THIN HEAD screw
BIND screw
S-THIN HEAD screw
Portage 2000 Maintenance Manual (960-333)
x2
x1
x2