Appendix A: Event Messages; Event Messages - IBM TotalStorage L10 Cli Reference Manual

Appendix A. Event messages
The L10 storage switch's event messages are listed below. For explanations, contact a
customer service representative. The message's applicable severity level as defined
below are given before each message.
Table 32. Event message severity levels
Severity Level
1
2
3
4
5
6
7
These severity levels can be used to designate which events trigger trap messages.
Using the Command Line Interface (CLI), you can designate the minimum severity level
of events to be logged in the Event Log and at which to illuminate the switch's Fault LED.
Table 33. Event messages
Event
1
5
6
9
10
19
20
50
54
70
71
72
73
74
75
76
77
78
79
80
81
© Copyright IBM Corp. 2004
Severity Description
EMERG Immediate action required; system failing
ALERT Unrecoverable condition reported; major event in
progress
CRIT Event failed with possible loss of integrity
ERR Condition failed; action required
WRN Failed event occurred; no action required
NOTIFY Configuration error or abnormal event occurred; no
action required
INFO Event occurred; no action required
Event Message
Message log cleared
Power Supply Failed
Power Supply Online
Fan has stopped
Fan has returned
Temperatures over limit
Temperature OK
SPF Overvoltage
SOC has detected a CRC error in the EEPROM
Port # bypassed
Port # inserted
Transceiver detected at Port #
Transceiver removed at Port #
SEOC occurred on Port #
Port # exceeded OS threshold
Port # exceeded CRC threshold
Loop UP on Port #
Loop DOWN on Port #
Port # received a LIP(F8)
Port # CRC Error detected in frame
Port # did not receive LIPF7) within timeout
Severity
INFO
ALERT
NOTIFY
EMERG
ALERT
ALERT
INFO
EMERG
NOTIFY
NOTIFY
NOTIFY
NOTIFY
NOTIFY
NOTIFY
NOTIFY
NOTIFY
NOTIFY
NOTIFY
WRN
WRN
WRN
67