Table of Contents
Advertisement
System configuration menu (root/config/sys)
The System configuration menu provides commands to configure the switch settings.
Menu commands
Table 4. System configuration menu commands
Command
1. speed
2. mode
3. oserr
4. crcerr
5. blkarb
6. clkd
7. time
8. lipen
9. name
10. location
11. contact
12. syslog
13. events
14. sev
15. fault
16. evclr
17. clrled
18. ..
19. ?
Setting the system speed (root/config/sys/speed)
This command sets the current speed per port at which the switch is running. All ports
operate at the same speed. The default setting is 2.125 Gb/s.
To change the switch speed:
Type speed <setting> and press E
Table 5. System speed settings
Setting
1
2
Description
Configures the switch speed.
Configures the switch mode.
Configures the OS Error Threshold.
Configures the CRC Error Threshold.
Configures the Blocking Arbitration AL_PA.
Configures the Clock Delta Threshold.
Configures the switch time.
Configures the Stealth Intelligent Change Manager
Configures the switch's name.
Configures the switch's location.
Configures the contact information for the individual or
party managing the switch.
Configure the switch for a system log server
Displays the event log.
Configures the event log's severity filter level.
Configures the event log's severity fault threshold.
Clears the event log.
Clears the Fault LED.
Returns to the previous menu.
Displays additional information on a command.
NTER
Description
Set switch speed to 1.0625 Gb/s.
Set switch speed to 2.125 Gb/s.
.
Chapter 2. Configuration menu (root/config)
Additional
Information
See page 11.
See page 12.
See page 12.
See page 13.
See page 13.
See page 14.
See page 14.
See page 14.
See page 15.
See page 15.
See page 15.
See page 16.
See page 18.
See page 18.
See page 19.
See page 19.
See page 19.
See page 10.
See page 10.
11
Advertisement
Table of Contents
