Table of Contents
Advertisement
Table 30. Sensor information
Setting
Enclosure Temperature Nominal (green)–the switch temperature is within the normal
Fan
Displaying connected device IDs (root/show/getcon)
This command displays the type of connection for a single port or for all ports. A
connection type of SEOC means that the switch has discovered and successfully
connected to a SEOC-enabled device.
To view the connected device IDs for all ports:
From the Show menu (root/show), type getcon and press E
To view the connected device ID for a specific port:
From the Show menu (root/show), type getcon <port number> and press E
Displaying PLL lock status (root/show/sync)
This command displays the Phase Loop Lock (PLL) status for a single port or for all
ports. The PLL indicates whether the port is operational or not.
To view the synchronization status for all ports:
From the Show menu (root/show), type sync and press E
To view the synchronization status for a specific port:
From the Show menu (root/show), type sync <port number> and press E
Displaying switch settings (root/show/dump)
This command displays the current switch settings in XML-tagged format.
Note: This command generates and outputs a significant amount of data. It may take
To view the switch settings:
1. From the Show menu (root/show), type dump and press E
2. Type y and press E
60
2006 Model L10 Storage Switch
Indicator
operating range.
OverTemp (red)–the enclosure temperature has exceeded
the recommended operating range (above 45
Nominal (green)–the fan unit is working properly.
Not Present (yellow)–the fan unit has been removed or
cannot be detected.
Fault (red)–the fan unit has stopped operating.
some time before results are displayed.
A message appears confirming the request.
NTER
.
o
C).
.
NTER
NTER
.
NTER
NTER
.
NTER
.
.
Advertisement
Table of Contents
