Table of Contents
Advertisement
Table 28. System information (continued)
Setting
Fault Status
InSpeed SOC Status
Current Time
System Up Time
IP Address
Netmask
Default Gateway
Displaying zone information (root/show/zninfo)
This command displays zone status (enabled or disabled) and current zone information,
including the zone number, current state, LIM, and Up Count.
To view zone information:
From the Show menu (root/show), type zninfo and press E
Displaying Load Balancing information (root/show/lbinfo)
This command displays the current load balancing information, including port number,
port members, and associated AL_PAs.
To view load balancing information:
1. From the Show menu (root/show), type lbinfo and press E
2. Press E
A list of ports and their associated modes and utilization percentages appears.
Table 29. Load Balancing information
Value
Mode
Utilization (%)
58
2006 Model L10 Storage Switch
Description
The current status of the switch.
The current status of the InSpeed SOC chipset.
The switch's current date and time.
The duration of time that the switch has been operational. If
the switch is rebooted or power is cycled, this value is reset.
The current IP Address for the switch.
The current IP Netmask address for the switch.
The current Gateway address for the switch.
A list of ports and their associated port members and AL_PAs appears.
to continue.
NTER
Description
(1) timeOpen–When switching mode is enabled, this value
measures the percentage of time that the port is involved in a
connection, regardless of the amount of data that is being
sent.
(2) framesSeen–When switching mode is disabled, this value
measures the amount of frame data passing through the port.
Displays the utilization percentage for each port based on the
mode.
.
NTER
.
NTER
Advertisement
Table of Contents
