Appendix. Product specifications
This appendix provides the specifications for the SAN24B-5 switch.
v "Weight and physical dimensions"
v "Facility requirements"
v "Power supply specifications" on page 40
v "Environmental requirements" on page 40
v "General specifications" on page 41
v "Data transmission ranges" on page 42
v "Memory specifications" on page 42
v "Fibre Channel port specifications" on page 42
v "Serial port specifications" on page 43
Weight and physical dimensions
Table 8 lists the dimensions and weight of the switch.
Facility requirements
Table 9 provides the facility requirements that must be met for the switch.
© Copyright IBM Corp. 2012
Table 8. Switch dimensions
Dimension
Height
Depth
Width
Weight (with one power supply and fan
assembly, and no SFP+s installed)
Table 9. Facility requirements
Type
Requirement
Electrical
v Adequate supply circuit, line fusing, and wire size, as specified
v Circuit protected by a circuit breaker and grounded in
Thermal
v A minimum air flow of 79.8 cubic meters/hour (47 cubic ft/min.)
v Ambient air temperature not exceeding 40° C (104° F) while the
Value
1U = 4.3 cm (1.7 in)
44.3 cm (17.4 in)
43.8 cm (17.2 in) Note the slightly increased
width, which requires a slim rail rack mount
kit for mounting.
7.82 kg (17.25 lb)
by the electrical rating on the switch nameplate
accordance with local electrical codes
Refer to Table 10 on page 40 for complete power supply
specifications.
available in the immediate vicinity of the switch
switch is operating
39