Table of Contents
Advertisement
Chapter 3. Diagnostics menu (root/diag)
The Diagnostics menu provides commands for determining and correcting issues with
normal switch operation.
Menu commands
Table 25. Diagnostic menu commands
Command
1. galpa
2. glim
3. os
4. ps
5. delta
6. showpri
7. prtctrs
8. clrctr
9. beacon
10. con
11. who
12. ialpa
13. ..
14. ?
Displaying port AL_PAs (root/diag/galpa)
This command displays all AL_PAs for a single port or for all ports.
To view the AL_PAs for all ports:
From the Diagnostics menu (root/diag), type galpa and press E
To view the AL_PAs for a specific port:
From the Diagnostics menu (root/diag), type galpa <port number> and press E
Displaying LIM port (root/diag/glim)
This command displays the Loop Initialization Master (LIM) port for a single zone or for
all zones. The LIM port is responsible for starting the change notification process in
each zone.
To view the LIM ports for all zones:
From the Diagnostics menu (root/diag), type glim and press E
© Copyright IBM Corp. 2004
Description
Displays the port AL_PAs.
Displays the Zone Initialization Master port.
Displays the detected ordered sets.
Displays the port state.
Displays the port clock delta.
Displays the primary ports and the associated
duplicates.
Displays the error counters for one or more ports. See page 52.
Clears the counters.
Beacons a port.
Displays information on the connected device.
Displays information on the device that caused a
change notification.
Displays the Initiator AL_PAs.
Returns to the previous menu.
Displays additional information on a command.
Additional
Information
See page 49.
See page 49.
See page 50.
See page 51.
See page 51.
See page 52.
See page 52.
See page 52.
See page 53.
See page 53.
See page 53.
See page 10.
See page 10.
.
NTER
NTER
.
NTER
49
.
Advertisement
Table of Contents
