Introduction - Rcom MAX 20 User Manual

Digital egg incubator
Hide thumbs Also See for MAX 20:
Table of Contents

Advertisement

North America Sales & Service www.RcomCo.com
Electrical hazards
Do not use a damaged power
cord or loose outlet.
▶ Risk of electric shock or fire.
Setting Cautions
Do not install in dusty or dirty
environment.
▶ Risk of damage or fire within
the incubator.
Do not cover the ventilating
opening.
▶ Inner temperature can rise,
interrupting incubation.
Do not disassemble or modify
the incubator in any way.
▶ Risk if electric shock or fire.
Cleaning Cautions
Do not spray cleanser directly
on the incubator surface.
Rcom Egg Incubator Max 20 User Manual

1. Introduction

Do not pull the cord when
Never pull the plug out of the
taking out the power cord, and
outlet during the incubation
keep wet hands away from
period.
connecting plug.
▶ Incubation will be interrupted.
▶ Risk of electric shock or fire.
Do not install under the direct
Do not install in moist or
sunlight.
humid environment.
▶ Risk of fire or interference
▶ Risk of fire or electric shock.
with the incubation process.
Install away from heat
Ensure that the incubator is
sources.
installed on a stable surface
away from edges.
▶ Risk of damage to the
▶ Risk of damage to incubator
incubator case and
interference with the
and eggs and user from
incubation process.
accidental knocks or drops.
Please ensure that no small
If the incubator sounds
objects get into
strange or emits smoke
the holes on the incubator.
contact your service center.
▶ Risk of electric shock or fire.
▶ Risk of electric shock or fire.
Clean the incubator by a soft
Brush away dust on the plug
cloth with a neutral detergent.
with a dry cloth.
(2) Safety Precautions
Be careful the details below when you use.
Do not twist or crush electric
cord.
▶ Risk of electric shock or fire.
Be careful the details below when you use.
Do not install in excessively
cold or hot conditions,
cigarette smoke, etc.
▶ Risk of interference with
the incubation process.
Do not turn the incubator
upside down.
▶ Water will pour out of the
incubator, and view window
can be dropped or damaged.
Clean the incubator thoroughly
before storing.
Be sure to disconnect the electric cord
from the outlet before cleaning.
Do not use chemicals like wax,
benzene, alcohol, thinner,
aromatic, or lubricant, etc.
Do not insert multiple
connecting plugs in an outlet.
▶ Risk of fire or electrical
overload.
Do not use any other
non-standard parts except
those provided.
▶ Risk of damage or hatching
failure.
Children should be supervised
to ensure that they do not play
with the appliance.
▶ Risk of knocking the incubator
or accidental interference with
the controls.
If the incubator requires repair
disconnect from the power
supply and please contact to
your service center.
For special cleaning of inner
part per year, contact to the
service center.
▶ If you don't clean the inside of
incubator for a long time, dust
can cause some trouble or a fire.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAX 20 and is the answer not in the manual?

Questions and answers

Ubert
March 23, 2025

Mi si è accesa la spina dell'acqua e suona e lampeggia ma le vasche sono piene d'acqua cosa vuole dire e cosa devo fare

User image 67dfaa4d3159f
1 comments:
Mr. Anderson
March 23, 2025

If the water indicator light is on and flashing on the Rcom MAX 20, even though the tanks are full, it may indicate a power failure or a water shortage alarm. The first alarm occurs when water is low, and a second alarm sounds after three hours if the issue persists.

To resolve this, press the "SET" button to remove the alarm and ensure the water supply system is functioning properly.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF