1. Introduction
Electrical hazards
Do not use a damaged power
Do not pull the cord when
cord or loose outlet.
taking out the power cord, and
keep wet hands away from
▶ Risk of electric shock or fire.
connecting plug.
▶ Risk of electric shock or fire.
Setting Cautions
Do not install in dusty or dirty
Do not install under the direct
environment.
sunlight.
▶ Risk of damage or fire within
▶ Risk of fire or interference
the incubator.
with the incubation process.
Do not cover the ventilating
Install away from heat
opening.
sources.
▶ Inner temperature can rise,
▶ Risk of damage to the
interrupting incubation.
incubator case and
interference with the
incubation process.
Do not disassemble or modify
Please ensure that no small
the incubator in any way.
objects get into
the holes on the machine.
▶ Risk if electric shock or fire.
▶ Risk of electric shock or fire.
Cleaning Cautions
Clean the machine by a soft
Brush away dust on the plug
cloth with a neutral detergent.
with a dry cloth.
4
(2) Safety Precautions
Be careful the details below when you use.
Never pull the plug out of the
Do not twist or crush electric
outlet during the incubation
cord.
period.
▶ Risk of electric shock or fire.
▶ Incubation will be interrupted.
Be careful the details below when you use.
Do not install in moist or
Do not install in excessively
humid environment.
cold or hot conditions,
cigarette smoke, etc.
▶ Risk of fire or electric shock.
▶ Risk of interference with
the incubation process.
If the machine requires repair
Ensure that the incubator is
installed on a stable surface
disconnect from the power
away from edges.
supply and please contact to
your service center.
▶ Risk of damage to incubator
and eggs and user from
accidental knocks or drops.
If the machine sounds
Clean the machine
strange or emits smoke
thoroughly before storing.
contact your service center.
▶ Risk of electric shock or fire.
Be sure to disconnect the electric cord from the outlet
before cleaning.
Do not use chemicals like wax,
For special cleaning of inner
benzene, alcohol, thinner,
part per year, contact to the
aromatic, or lubricant, etc.
service center.
▶ If you don't clean the inside of
incubator for a long time, dust
can cause some trouble or a fire.
Do not insert multiple
connecting plugs in an outlet.
▶ Risk of fire or electrical
overload.
Do not use any other
non-standard parts except
those provided.
▶ Risk of damage or hatching
failure.
Children should be supervised
to ensure that they do not play
with the appliance.
▶ Risk of knocking the machine
or accidental interference with
the controls.
Do not place water container
on the machine.
DIGITAL INCUBATOR
Need help?
Do you have a question about the MARU DELUXE Hatcher & Brooder MX-100HBD and is the answer not in the manual?
Questions and answers