Table of Contents
Advertisement
North America Sales & Service www.RcomCo.com
How to Set Abnormal High or Low Temperatue Alarm
▶ What is Abnormal High or Low Temperature Alarm?
It is alarm soulds when incubator temperature is higer or lower than setting value because of various
reasons such as room temperature change or disorder of temperature controlling system.
5Sec.
* Max. abnormal temp. alarm limit (0.0 ~ 5.0℃ Default Setting:2.0℃)
* Min. abnormal temp. alarm limit (0.0 ~ -5.0℃ Default Setting:-3.0℃)
How to Set Egg Turning ON/OFF
▶ Egg Turning Test : If you press
about 5 seconds, egg turning test will be effected once.
▶ In a state of
button then the setting will be changed as required.
Be sure to set TURNING OFF 3 days before hatching.
repeat
▶ Plese press
to turn ON or OFF egg turning melody.
Rcom Egg Incubator Max 20 User Manual
3. Function Settings
Set required
Save setting and
high range with
pass to
UP / DOWN button
low humi. set
button for
button being pressed, press
button over 5 seconds
(3) Temperature & Humidity Setting /
How to Set Egg-Turning
Save setting and
Set required
pass to current
low range with
temp. & humi.
UP / DOWN button
indication
(Keep pressing the button)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MAX 20 and is the answer not in the manual?
Questions and answers
Mi si è accesa la spina dell'acqua e suona e lampeggia ma le vasche sono piene d'acqua cosa vuole dire e cosa devo fare
If the water indicator light is on and flashing on the Rcom MAX 20, even though the tanks are full, it may indicate a power failure or a water shortage alarm. The first alarm occurs when water is low, and a second alarm sounds after three hours if the issue persists.
To resolve this, press the "SET" button to remove the alarm and ensure the water supply system is functioning properly.
This answer is automatically generated