Introduction - Rcom USB 20 User Manual

Electrical hazards
Do not use a damaged power Do not pull the cord when
cord or loose outlet. taking out the power cord, and
keep wet hands away from
Risk of electric shock or fire.
connecting plug.
Risk of electric shock or fire.
Setting Cautions
Do not install in dusty or dirty Do not install under the direct
environment. sunlight.
Risk of damage or fire within Risk of fire or interference
the incubator. with the incubation process.
Do not cover the ventilating Install away from heat
opening. sources.
Inner temperature can rise, Risk of damage to the
interrupting incubation. incubator case and
interference with the
incubation process.
Do not disassemble or modify Please ensure that no small
the incubator in any way. objects get into
the holes on the incubator.
Risk if electric shock or fire.
Risk of electric shock or fire.
Cleaning Cautions
Do not spray cleanser directly Clean the incubator by a soft
on the incubator surface. cloth with a neutral detergent.

1. Introduction

Be careful the details below when you use.
Never pull the plug out of the
outlet during the incubation
period.
Incubation will be interrupted.
Be careful the details below when you use.
Do not install in moist or
humid environment.
Risk of fire or electric shock.
Ensure that the incubator is
installed on a stable surface
away from edges.
Risk of damage to incubator
and eggs and user from
accidental knocks or drops.
If the incubator sounds
strange or emits smoke
contact your service center.
Risk of electric shock or fire.
Be sure to disconnect the electric cord
from the outlet before cleaning.
Brush away dust on the plug
with a dry cloth.
(2) Safety Precautions
Do not twist or crush electric Do not insert multiple
cord. connecting plugs in an outlet.
Risk of electric shock or fire. Risk of fire or electrical
overload.
Do not install in excessively Do not use any other
cold or hot conditions, non-standard parts except
cigarette smoke, etc. those provided.
Risk of interference with Risk of damage or hatching
the incubation process. failure.
Children should be supervised
Do not turn the incubator
to ensure that they do not play
upside down.
with the appliance.
Water will pour out of the
Risk of knocking the incubator
incubator, and view window
or accidental interference with
can be dropped or damaged.
the controls.
Clean the incubator thoroughly If the incubator requires repair
before storing. disconnect from the power
supply and please contact to
your service center.
Do not use chemicals like wax, For special cleaning of inner
benzene, alcohol, thinner, part per year, contact to the
aromatic, or lubricant, etc. service center.
If you don't clean the inside of
incubator for a long time, dust
can cause some trouble or a fire.