Table of Contents
Advertisement
North America Sales & Service www.RcomCo.com
How to use Rcom MAX 20
(1) Rcom 20 Introduction
(2) Safety Precautions
(3) Identification of Parts and Composition
(4) Function of Digital Control & How to Operate
(1) How to Assemble the Incubator / Egg-Turning plate
(2) What is an incubation room?/ Preparation for Incubation
Incubator Start&Termination /
(1)
(3) Temperature & Humidity Setting / How to Set Egg-Turning
Humidity & Air Maintenance during Incubation /
(1)
(1) How to Disassemble
(2) How to Clean
(1) Servicing / Frequently Asked Questions (FAQ)
(2) Troubleshooting
(3) Specification
The result of Hatching can be changed by a large numbers of factors. Autoelex Co., Ltd. &
our distributors will not take any responsibility for 'Loss of eggs or pet/animal lives' under any
circumstances such as 'Hatching/Brooding failures', 'User's carelessness', 'Personal (un-certificated)
conversion / alteration', 'Arbitrary using out of the machine's purpose', 'Electric power failure', or
'Malfunctioning'. Please be sure that the machine works without any problem before placing Eggs or
Pets(Animals). Also, we strongly recommend you to read the User's Manual carefully to minimize of
any failure.
Caution :
Tip :
References or useful suggestions in using Rcom product
Rcom Egg Incubator Max 20 User Manual
Contents
(2) Change Cels.& Fahr.
(2) Dew Condensation
Mark Explanation
Caution mark against a fault that can cause damage, trouble, or failure of incubation.
Prohibited
Do not disassemble.
Do not touch.
Warning of actions which may be dangerous or cause damage to the incubator.
It is necessary to keep.
Remove the power cord from outlet.
Ground Connection for preventing electric shock.
Introduction
Before use
Incubation
How to Clean
Product Information
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MAX 20 and is the answer not in the manual?
Questions and answers
Mi si è accesa la spina dell'acqua e suona e lampeggia ma le vasche sono piene d'acqua cosa vuole dire e cosa devo fare
If the water indicator light is on and flashing on the Rcom MAX 20, even though the tanks are full, it may indicate a power failure or a water shortage alarm. The first alarm occurs when water is low, and a second alarm sounds after three hours if the issue persists.
To resolve this, press the "SET" button to remove the alarm and ensure the water supply system is functioning properly.
This answer is automatically generated