Table of Contents
Advertisement
North America Sales & Service www.RcomCo.com
Function of Digital Control & How to Operate
Temp. UP Button
Setting Temp. Up
Calibration Temp. Up
Temp. DOWN Button
Setting Temp. Down
Calibration Temp. Down
Egg-Turning Setting Button
Automatic egg-turning setting
or cancellation
/ Egg-turning test
Heater Lamp
(Lighting when working)
What's 'Temperature&Humidity Setting'?
This is that you set up temp.&humi. As you want to have inside of the machine.
[ Function Operation & Explanation ]
Function
Temp.
Setting
Humidity
Setting
Egg-Turning
Interval Setting
Egg-Turning
Test
Changing
Cels. & Fahr.
Initialization
(Factory setting)
How to OFF
Humidification
Function
Rcom Egg Incubator Max 20 User Manual
1. Introduction
Temp. Display
Egg-Turning Lamp
Power Failure Alarm Function
Turn on with automatic
egg-turning mode.
Blink with power failure
(Blink when working)
(to remove, press SET button)
How to Operate
Humidity Display
Water Supplement Lamp
(Blink with water shortage)
- Alarm for water supplement sounds in twice.
( First alarm with water shortage / Second alarm after 3 hours )
put some water after take off label from the back and attach to the window.
If you want to change setting value, keep pressing "SET" button and change the value.
20%
(4) Function of Digital Control &
How to Operate
Humidity UP Button
Setting Humidity Up
Calibration Humidity Up
Humidity DOWN Button
Setting Humidity Down
Calibration Humidity Down
Setting Button
Setting value check
Humidification working lamp
(Lighting when working)
Explanation
Setting of needed temp.
Setting of needed humidity.
Egg-Turning Interval Setting
as required
Egg-Turning Test (once)
Changing Cels. & Fahr.
Initialization
Set Humidity as 20%
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MAX 20 and is the answer not in the manual?
Questions and answers
Mi si è accesa la spina dell'acqua e suona e lampeggia ma le vasche sono piene d'acqua cosa vuole dire e cosa devo fare
If the water indicator light is on and flashing on the Rcom MAX 20, even though the tanks are full, it may indicate a power failure or a water shortage alarm. The first alarm occurs when water is low, and a second alarm sounds after three hours if the issue persists.
To resolve this, press the "SET" button to remove the alarm and ensure the water supply system is functioning properly.
This answer is automatically generated