Table of Contents
Advertisement
North America Sales & Service www.RcomCo.com
3. Function Settings
How to Set Temperature
▶ In a state of
temperature you want with
Temperature setting will be completed when you remove
your finger from the
temperature of the incubator inside will be indicated.
If you set the incubator under a direct ray of light or too cold spot, the incubator temperature can be higher
or lower than setting temperature.
If you press SET button, the present setting temperature and humidity will be indicated and, if you remove
your finger from the button, the present inner temperature and humidity indicated.
How to Set Humidity
▶ In a state of
▶ In a state of
humidity you want with
humidity you want with
humidity setting will be completed when you remove your
humidity setting will be completed when you remove your
finger from the
finger from the
of the incubator inside will be indicated.
of the incubator inside will be indicated.
▶ Be sure to set humidity RH 65 ~ 70% from 1~3 days before hatching.
▶ Be sure to set humidity RH 65 ~ 70% from 1~3 days before hatching.
Temperature and humidity can be different from normal setting levels according to the surrounding
Temperature and humidity can be different from normal setting levels according to the surrounding
environment. (Refer to a incubation guidebook which is supplied separately.)
environment. (Refer to a incubation guidebook which is supplied separately.)
Temperature and humidity is optimized when Rcom products are released.
Temperature and humidity is optimized when Rcom products are released.
We do no recommend customers to recalibrate by their own. If you need to recalibrate, please visit our
We do no recommend customers to recalibrate by their own. If you need to recalibrate, please visit our
Because of low price thermometers and hygrometers are not accurate, e recommend you to use special
Because of low price thermometers and hygrometers are not accurate, e recommend you to use special
How to Turn ON/OFF Humidification Function
▶ In a state of
humidification function will be OFF. On the contrary, if you adjust humidity above RH 20%, its function will
be ON.
In case you use the incubator without adding humidification water or intend to incubate eggs at low
humidity under RH 20%, you must stop its humidification function. please turn off the humidity unit if the
unit is empty water otherwise, humidity unit will be broke or you may not no longer use the unit.
Rcom Egg Incubator Max 20 User Manual
(3) Temperature & Humidity Setting /
How to Set Egg-Turning
button being pressed, adjust the
or
button, and the present
button being pressed, adjust the
button being pressed, adjust the
or
or
button.
button.
button, and the present humidity
button, and the present humidity
button being pressed, press
button.
(Keep pressing the button)
(Keep pressing the button)
button to adjust humidity at RH 19% and, then,
Ⅱ)
Ⅱ)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MAX 20 and is the answer not in the manual?
Questions and answers
Mi si è accesa la spina dell'acqua e suona e lampeggia ma le vasche sono piene d'acqua cosa vuole dire e cosa devo fare
If the water indicator light is on and flashing on the Rcom MAX 20, even though the tanks are full, it may indicate a power failure or a water shortage alarm. The first alarm occurs when water is low, and a second alarm sounds after three hours if the issue persists.
To resolve this, press the "SET" button to remove the alarm and ensure the water supply system is functioning properly.
This answer is automatically generated