Fujitsu IP-920 E/DC Hardware User's Manual page 21

No. Names
LAN port
(8)
(10/100BASE)
Speed LED
(9)
(100M)
Status LED
(10)
(LINK/ACT)
RS-232C port
(11)
(RS-232C)
Audio input
(12)
(ANALOG AUDIO IN)
FG terminal
(13)
)
(FG
Maintenance mode switch
(14)
(MNT)
HDMI input
(15)
(HDMI)
SDI video input
(16)
(SDI)
Video input
(17)
(ANALOG VIDEO IN)
(18) CF CARD slot
AUX port
(19)
(AUX)
(20) Test port
Description
Ethernet 10BASE-T/100BASE-TX communication port. See Section 2.4,
"Connection to a Network," for an explanation on using this port. See Section
4.2, "Cable and Connector Details," for cable connection information.
Indicates the status of LAN port. For more information, see Table 5.3, "Details
of LED Indications," in Section 5.2.
Indicates the speed of LAN port. For more information, see Table 5.3, "Details
of LED Indications," in Section 5.2.
RS-232C data communication port.
See Section 2.5, "Connection to an RS-232C Device," for an explanation on
using this pin. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Audio input terminal. 600Ω balanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Use for an FG connection to this equipment.
See Section 2.2.1, "Connection to ground," for an explanation on using this
terminal.
IP-920E start mode selector switch. when the IP-920E is powered on with this
switch held down, it starts in initial start mode.
See section 3.3, "Special Use of MNT Button," for an explanation on using this
switch.
Digital HDMI video input terminal. 50Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Digital HD-SDI video input terminal. 75Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Analog video input terminal. 75Ω unbalanced.
See section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Slot in which a CompactFlash
Auxiliary port.
Factory test port.
7
Chapter 1 Preparations
@
card is inserted.
IP-920E/DC