Audio And Video Device Connections - Fujitsu IP-920 E/DC Hardware User's Manual

2.3
2.3
2 Digital and 1analog video input connectors are equipped for connecting with video output equipment.
- SDI Video Input (Digital Video)
Connect to SDI IN connector using BNC cable. Input digital HD-SDI or SD-SDI signal.
The signal is terminated with 75Ω impedance.
- HDMI Input (Digital Video)
Connect to HDMI connector on front panel of IP-920E/DC using the HDMI cable.
Input digital signal of HDMI. The signal is terminated with 50Ω.
- Analog Video Input
Connect to ANALOG VIDEO IN connector using
2 Digital and 1analog audio input connectors are equipped for connecting with audio output equipment.
- Digital Audio Input
SDI Embedded Audio and HDMI audio are supported.
- Analog Audio Input
Connect to ANALOG AUDIO IN connector of IP-920E using the audio adaptor cable.
The figure of cable connections are shown below.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
12 - 24V

Audio and Video Device Connections

10/100BASE
E
PWR ALM OPT
RDY IN
DWN
FG
MNT
Video & Audio Output Device
Figure Audio and video output device connections
BNC cable with NTSC or PAL signal.
RS-232C
ANALOG AUDIO IN
100M
LINK
/ACT
35
Chapter 2 Installation and Connection
Audio adapter cable#1
or
Audio adapter cable#3
or or
PUSH PUSH
IP-920E/DC