Agilent Technologies N6700 Series User Manual page 48

System Related Operations
Front Panel Contrast
Built-In Web Server
NOTE
48
Front Panel:
Select
System\Preferences\Display
Enable or disable the screen saver
by checking the Screen Saver
checkbox. Then Press Select.
Enter a value in minutes in the
Saver Delay field to specify the time
when the screen saver will activate.
Check Wake on I/O to activate the
display with I/O bus activity.
You can set the contrast of the front panel display to compensate for
ambient lighting conditions. The contrast can be set from 0% to 100%
in increments of 1%. As-shipped, the contrast is set to 50%.
Front Panel:
Select
System\Preferences\Display
Enter a contrast value in the
Contrast box. Then Press Select.
The power system contains a built-in Web server that lets you control
the instrument directly from an internet browser on your computer.
This feature requires Internet Explorer 5+ or Netscape 6.2+. Your PC must also
have the ability to communicate over a LAN.
The Web Server function is enabled when shipped. Provided that you
have correctly configured the instrument's LAN settings as discussed
in chapter 3, simply type the instrument's Host name or IP address
into your browser to launch the application.
Front Panel:
Select
System\Interface\LAN\Web
To enable the Web server, check
the Enable Web Server checkbox.
SCPI Command:
Not Available.
SCPI Command:
Not available.
SCPI Command:
Not Available.
Series N6700 User's Guide