Agilent Technologies N6700 Series User Manual page 166

Compatibility Commands
Agilent 662xA Command
VMUX? <ch>, <input>
VOUT? <ch>
VRLO <ch>
VRHI <ch>
VRSET <ch>, <x>
VRSET? <ch>
VSET <ch>, <voltage>
VSET? <ch>
VSTEP <ch>, <x>
166
Description
Generates error −113.
Queries the measured output voltage of the specified output channel. The
response is a real number. The front panel display can be used to monitor
the measured output voltage (and current) of the selected output channel.
Generates error −113.
Generates error −113.
Sets the full-scale voltage range programming for an output channel. The
power system will select the lowest operating range that will contain the
value (x). If the present operating voltage is greater than the full-scale
range selected, the present output voltage will be reduced to the full-scale
value of the new range selected. If the voltage entered is larger than the
highest possible range, an error message will result.
Queries the full scale voltage range setting of an output channel.
Sets the voltage of the specified output channel.
Queries the present voltage setting of the specified output channel. The
response is a real number.
Increases or decreases the output channel voltage in steps. If the step
value < x > is positive, output voltage will increase by the step value, if the
step value is negative, the output voltage will decrease by the step value.
Trying to step beyond the operating range will cause a number range error.
Similar SCPI
Command
None
MEAS:VOLT?
None
None
None
None
VOLT
VOLT?
LIST:VOLT
Series N6700 User's Guide