Front Panel Display - At A Glance; Front Panel Keys - At A Glance - Agilent Technologies N6700 Series User Manual

Front Panel Display – At a Glance
Single-channel View
Press the Meter key
to toggle between
views
Multiple-channel View Voltage and Current measurements
Press the Meter key
to toggle between
views
Front Panel Keys – At a Glance
System Keys
Navigation Keys
Output Keys
Number Keys
7 8 9
4 5 6
3
1 2
0 .
Series N6700 User's Guide
Voltage measurement
Operating mode (CV =
constant voltage mode)
The highlighted channel is the active channel
Meter returns the display to metering mode.
Meter Menu
Menu accesses the command menu.
Channel selects or highlights a channel to control.
Back
Channel
Back backs out of a menu without activating any changes.
Help accesses information about the displayed menu control.
Help Error
Error displays any error messages in the error queue.
The arrow keys let you move around in the command menus.
Sel
The Select key lets you make a selection in the command menus.
It also lets you enter edit mode for numeric parameters.
On/Off controls the selected output (or all outputs when ALL is lit).
On/Off
This key is only active in Single- channel or Multiple-channel view.
Voltage
Voltage lets you change the voltage setting of the selected channel.
Current lets you change the current setting of the selected channel.
Current
The number keys let you enter digits from 0 to 9 and a decimal point.
The minus sign is selected by the +/− key.
The exponent must be added to the right of the E symbol.
The backspace key deletes digits as it backspaces over them.
arrow keys increment or decrement the value in certain fields. They
are also used to select letters in alphabetic entry fields.
The Enter key enters a value. If you exit a field without pressing the Enter
key, the value is ignored.
Front Panel Display – At a Glance
Current measurement
Voltage and Current Remote interface status
settings (ALL, SRQ, ERR, IO)
11