Table 5 Filter Commands - Keithley 2520 Quick Reference Manual

Remote filter programming
Table 5 summarizes filter commands.
Table 5
Filter commands
Commands
[:SENSe[1]]:AVERage:COUNt <count>
[:SENSe[1]]:AVERage[:STATe] <state>
:SENSe2:AVERage:COUNt <count>
:SENSe2:AVERage[:STATe] <state>
:SENSe3:AVERage:COUNt <count>
:SENSe3:AVERage[:STATe] <state>
Filter programming example
Table 6 summarizes the command sequence to program filter aspects as follows:
• Average filter on.
• Average filter count 20.
Table 6
Filter programming example
Command
:AVER:COUN 20
:AVER ON
Set average filter count (1 to 100).
Enable/disable average filter (ON or OFF).
Set average filter count (1 to 100).
Enable/disable average filter (ON or OFF).
Set average filter count (1 to 100).
Enable/disable average filter (ON or OFF).
Description
Set average count to 20.
Enable average filter.
Quick Reference Guide
Description
17