Berkel 330M Owner's/Operator's Manual page 12

ASSEMBLY
Supply of machine only:
1.­ Lift the machine carefully and insert the four similar
rubber feet in the lodgings in the base.
2. Put under the head of the machine the other foot (dif-
ferent­from­the­rubber­feet)­screwing­it­in­the­lodging­
in the head.
3. Put the machine in its place of installation.
Supply of machine and support column
The­machine­is­supplied­with­also­two­washers­and­two­bolts,­put­together­with­the­feet.
1.­ Lift the machine carefully and pay attention to insert the rub-
ber­holed­feet­in­order­to­have­the­same­shape­of­the­pedestal­
plate­(marked­with­the­arrow)­with­the­same­shape­of­the­
machine.
2. Place the machine on the support column trying to put the
holed rubber feet in correspondence of the holes on the plate.
3. Adjust the position on the column regulating the height of the
foot E.
4. Check­that­the­machine­is­correctly­settled­on­the­column,­
then lock the machine in place by inserting the screws in the
holes.
5. Eliminate­all­the­packaging­(straps,­cardboard,­polyurethane­
foam­or­polystyrene,­polyethylene­bags,­etc.)
The­packaging­components­(plastic­straps,­cardboard,­polyurethane­foam)­can­be­thrown­away­with­
normal­solid­wastes­and­therefore­there­is­no­difficulty­in­disposing­of­them.
However­it­is­advisable­to­dispose­of­products­separately­(differential­collecting)­in­conformity­with­
the regulations in force for adequate recycling.
Do­not­discard­the­packaging­products­in­the­environment!
12 • 330M Slicer o /o
wner
m
peraTor anUal
WARNING