Cisco Prisma II Installation And Operation Manual page 80

LCI Device Tree Overview,
Device Information
Information about a device (its parameters, alarms and statuses) is located in the
Device Details window. Within the device tree, you can access this window using
one of the following four methods:
• Double-click the chassis and select the device in the graphic that displays
• Right-click the chassis and select Open from the menu that displays
• Double-click the module
• Right-click the device and select Details from the menu that displays
Note: Although you can use the method that's most convenient for you, the
procedures throughout this chapter are described using the right-click device
technique.
For more information about each of these methods, refer to the next section,
Accessing the Device Details Window.
78-715192-01 Rev C
Continued
Operation Using the LCI Software 4-13