Cisco Prisma II Installation And Operation Manual page 46

The ICIM Password,
Disabling the User Password
If a User password has been entered, you may disable it at any time. However, the
current password must be active prior to disabling it. If the current password has
expired (more than 10 minutes have passed since your last keystroke), you must re-
enter the current password before disabling it.
1.
Press the
2.
Use the
3.
Press the
4.
Use the
5.
Press the
6. If the current password is active, the menu displays Password Is Now
Disabled. You can now make changes to parameters without any password.
7. If the current password has expired (more than 10 minutes have passed since
your last keystroke), the menu displays Failed, Password Not Active. You
must re-enter the current password and then repeat this procedure.
I C I M
- - - - - - - - - -
S h e l f
S l o t
- - - - - - - - - -
U s e r P s w
- - - - - - - - - -
S A P s w
- - - - - - - - - -
C h a n g e
- - - - - - - - - -
D i s a b l e
P s w
78-715192-01 Rev C
Continued
key.
ICIM
key to scroll down until Password is highlighted.

key.
SEL
key to scroll down until Disable Psw is highlighted.

key to select Disable Psw.
SEL
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
- - - - - - - - - -
P s w P a s s w o r d
I s N o w
D i s a b l e d
S h i f t
Operation Using the ICIM
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
- - - - - - - - - -
F a i l e d ,
P a s s w o r d
N o t A c t i v e
O f f S h i f t
7
1 5
O f f
3-11