Checking Bdr Transmit Processor Alarms Using The Icim - Cisco Prisma II Installation And Operation Manual

Checking bdr Transmit Processor Alarms Using the ICIM

Checking Alarms
If the red ALARM LED on the front panel is blinking a minor alarm condition is
indicated. If the red ALARM LED on the front panel is illuminated, a critical alarm
conditions is indicated.
Alarms fall into one of the following categories.
• Major low
• Minor low
• Minor high
• Major high
To check alarm conditions follow these steps.
1.
From the MAIN menu, press the
fields.
2.
Press the
the
3.
Press the
4.
Press the
5.
Press the
6.
Press the
7.
Use the
desired alarm is displayed.
8. Monitor the alarm condition(s). Take appropriate action. Verify that all
settings and thresholds relating to the alarm indication are set correctly to
rule out an unintended alarm.
9.
When finished, press the
78-715192-01 Rev C
key to address the Shelf number. Then press the
SEL
keys to scroll to the number of the desired shelf.

key. The Slot field is highlighted.
ENTER
key or the

key. The MODULE menu is displayed on the ICIM.
ENTER
ALRM key. The module alarm conditions are displayed here.
key or the


MAIN
Operation Using the ICIM
key to highlight the Shelf and Slot

key to scroll to the number of the desired slot.

key to scroll through alarm conditions until the
key. The display returns to the MAIN menu.
key or

3-23