Cisco Prisma II Installation And Operation Manual page 45

The ICIM Password,
Changing the User Password
Important: The current User password must be active prior to changing it. If the
current password has expired (more than 10 minutes have passed since your last
keystroke), you must re-enter the current password before changing to a new one.
Follow the steps below to change the User password.
Access the password function as shown in the procedure Accessing the
1.
Password Function.
2.
Use the
3.
Press the
4.
When Change Psw /Shift Off is displayed, press the
Shift On - then enter the 8 digits of your new password, using the 0-9 number
keys. If you input a digit that is incorrect or wish to change a digit, use the
CAN (Cancel) function by pressing the
5.
Press the
password entry was accepted or rejected. If the entry was accepted, you are
able to return to the MAIN menu.
6.
If the new password you entered is rejected, press the
the password function, then re-enter the new 8-digit password. Press the
ENTER
I C I M
- - - - - - - - - -
S h e l f
S l o t
- - - - - - - - - -
U s e r P s w
- - - - - - - - - -
S A P s w
- - - - - - - - - -
C h a n g e
- - - - - - - - - -
D i s a b l e
P s w
3-10
Continued
key to scroll down until Change Psw is highlighted.

key to select Change Psw.
SEL
key to. The ICIM updates the display to show if your
ENTER
key.
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
C h a n g e
- - - - - - - - - -
P s w
S h i f t
Operation Using the ICIM
ALRM key to delete that digit.
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
P s w C h a n g e
* * * * * * * *
- - - - - - - - - -
O f f S h i f t
key to display
SHIFT
key to return to
SHIFT
I C I M
- - - - - - - - - -
7 S h e l f
1 5 S l o t
- - - - - - - - - -
P s w C h a n g e
8 7 6 5 4 3 2 1
- - - - - - - - - -
O n S h i f t
78-715192-01 Rev C
7
1 5
P s w
O n