Cisco Prisma II Installation And Operation Manual page 87

Configuring the bdr Transmit Processor,
Configuring Parameters
To configure the parameters, follow these steps.
1. Access the Device Details window. The Device Details window displays.
2. Under Controls, double-click the parameter you want to configure.
Result: The Change Value dialog box displays. The graphic below shows the
dialog box for the Redundant Mode parameter.
3. Depending on the parameter you chose, select or type a new value.
4. Click Execute.
Result: The new value displays next to the parameter.
4-20
Continued
Operation Using the LCI Software 78-715192-01 Rev C