System Requirements - Cisco Prisma II Installation And Operation Manual

System Requirements

Introduction
You will need the following computer software and hardware to run the LCI
software. Typically a laptop PC is used for portability.
Computer Requirements
• Pentium II
• 128 MB RAM
• 10 MB available hard drive space
• 1.44 MB floppy drive
• CD-ROM Drive
• Windows
Connecting the PC to the Prisma II Chassis
The required cable is a standard "off the shelf" DB9 Female to DB9 Male serial
extension cable. The connectors are a serial 9-pin D-shell (EIA 574/232).
The Cisco part number for a six-foot DB9 Female to DB9 Male extension cable is
180143.
4-4
300 MHz processor or equivalent
®
95 or later operating system software
®
Operation Using the LCI Software 78-715192-01 Rev C