Registration Of Selected Controller Configuration; Working With Honeywell N-1000 Integration Module; General Information About Working With Honeywell N-1000 Module; Controlling Honeywell N-1000 Access Point - Honeywell N-1000 Settings Manual

5. Click Apply in order to save changes ( ).
Registration of maximal configuration is completed.

Registration of selected controller configuration

Registration of selected controller configuration is carried out on setting panel of
required controller. It is carried out the following way:
1. To register controller configuration click
Note.
To restart controller click
2. To register access cards of users click
3. To synchronize time click
Registration of controller configuration is completed.
Working with HoneyWell N-1000 integration
module
General information about working with HoneyWell
N-1000 module
The following interface objects are used for working with
1. Card;
2. Event protocol;
3. Visitor Management System;
4. Time and Attendance.
Information about these interface objects' configuration is given
Management System Module Settings and Operation Guide
Working with interface objects is given in details in

Controlling HoneyWell N-1000 access point

Controlling access point of
door object.
Description of feature menu commands of
Command of feature menu
Open the door for time
Close the door
Open the door
Controlling HoneyWell N-1000 entrances or entrance
group
Controlling entrances or entrance group of
menu of N1000 entrance
17
5
Forward configuration 1
Restart 2 . ( )
Forward users 3
Set time 4 ( ).
Intellect Software package: Operator's Guide
HoneyWell N-1000 ACS is carried out in
N1000 door
Functionality
Open passage through access point for some time
Close passage through access point
Open passage through access point
HoneyWell N-1000 ACS
or N1000 zone objects.
N1000 panel
( ).
( ).
HoneyWell N-1000 integration module:
Intellect Software package: Administrator's
and Time and Attendance Module Settings and Operation Guide
Card interactive box using feature menu of
object is given in the table.
is carried out in
object corresponding to
Guide,
.
Card interactive box using feature
Visitor
.
N1000