List Of Terms Used In Honeywell N-1000 Integration Module Settings Guide; Introduction Into Honeywell N-1000 Integration Module Settings Guide - Honeywell N-1000 Settings Manual

List of terms used in HoneyWell N-1000
integration module Settings guide
Access is a movement of people, transport and other objects into (out of) premises, buildings, zones and territories.
Server is a computer with specified
Access card is a physical access identifier that is registered by the reared.
PIN code is an additional identification user characteristic that is typed from keyboard.
Controllers of HoneyWell N-1000
Access control system (ACS) is a hardware-software complex that is used for access control.
Readers are electronic devices that are used for typing stored code from keyboard or for reading code information from
system keys (identifiers).
Access point is a place where there is access control. Door, turnstile, gates, barrier that are equipped with reader,
electromechanical lock and other access control devices, can be an access point.
Time schedule - a set of any number of time intervals during a day (24 hours) defined for several days (1 to 366), and the
time intervals during specific dates. Time schedule defines a schedule of access to the secured object.
Introduction into HoneyWell N-1000
integration module Settings guide
On the page:
Purpose of document
General information about «HoneyWell
N1000» integration module
Purpose of document
HoneyWell N-1000 integration module. Configuration and operation guide is a reference and information manual. It is
meant for configuration specialists and operators of
system that is carried out on the basis of
The following information is performed in this Guide:
1. General information about
2. Setting up HoneyWell N-1000
3. Working with HoneyWell N-1000
General information about «HoneyWell N1000» integration
module
HoneyWell N1000 integration module is a component of ACS that is carried out on the basis of
package and is for realization of the following functions:
1. HoneyWell N-1000
2. Interaction of HoneyWell N-1000 ACS
Note.
Detailed information about HoneyWell N1000 ACS is given in official reference documentation for this system.
N-1000-III and N-1000-IV
controllers are for ACS construction on the objects of medium size.
Technical features of N-1000-III and N-1000-IV controllers are given in the table.
Feature
Number of supported readers /
keyboards
Maximum number of users, persons
3
Server configuration of
access control system are electronic devices that are for control over access points.
HoneyWell N-1000
ACFA Intellect
HoneyWell N-1000
integration module;
integration module.
ACS configuration ( Honeywell
with ACFA Intellect
HoneyWell N-1000 ACS controllers are integrated into ACFA Intellect software package.
5 000 (with 25 000 resolution)
Intellect software package
module. This module is a part of access control
software package.
integration module;
Security is a manufacturer);
software package (configuration, monitoring, control).
N-1000-III
2/2
.
ACFA Intellect software
N-1000-IV
4/2 or 0/4
5 000 (with 25 000 resolution)
These