Table of Contents
Advertisement
a.
If it's necessary to control double-pass set the corresponding checkbox ( ).
b.
Set
Ignore violations
c.
Set
Free exit
d.
Set
Permanent code-reading
exit impulse duration ( ).
e.
Set
Groups
f.
If 11-wires keyboard is used in controller it's necessary to set the corresponding checkbox ( ).
g.
Set
In/out commands transmission
h.
If it's necessary to use reader reverse color set the corresponding checkbox ( ).
i.
If it's necessary to use ABA-card long format set the corresponding checkbox ( ).
Note.
ABA is the MSR ABA TK2 emulation interface for magnetic access cards.
j.
If it's necessary to create alarm message on exiting the closed time zone set the corresponding checkbox (1
0
).
k.
If it's necessary to create standard message on exiting the closed time zone set the corresponding checkbox
(
11
).
l.
If it's necessary to switch entrances set the corresponding checkbox and select necessary type (
7.
Click
to save formats.
Note.
3 formats card of Wiegand type are set on default: 26-,32- and 34-bit.
7
checkbox if there is no need to store user violations ( ).
checkbox if it's necessary to ask access while passing to exit ( ).
checkbox if it's necessary to read card code permanently and regardless of
4
checkbox if it's necessary to create groups of exits ( ).
and set up used formats of access cards of Wiegand type. After setting click
5
checkbox if it's necessary to transmit
1
2
3
6
In
and
Out
commands ( ).
8
9
12
).
ОК
7
in order
Hide quick links:
Advertisement
Table of Contents
