Supported Hardware And Licensing Of The Honeywell N-1000 Integration Module; Setting Up Honeywell N-1000 Integration Module; Honeywell N-1000 Integration Module Set Up Procedure; Setting Up Honeywell N-1000 Acs Connection - Honeywell N-1000 Settings Manual

Storage, events capacity
Number of relay outputs
Number of alarm inputs
Before setting up HoneyWell N-1000
1. Install HoneyWell N-1000 ACS
ACS ).
2. Connect HoneyWell N-1000 ACS
Supported hardware and licensing of the
Honeywell N-1000 integration module
Manufacturer
Integration type
Equipment connection
Supported equipment
Equipment Function
N-1000 Access controller
Protection
1 controller.
Setting up HoneyWell N-1000 integration
module

HoneyWell N-1000 integration module set up procedure

Setting up HoneyWell N-1000
1. Setting up connection of
2. Setting up controllers.
3. Setting up access
4. Setting up entrances and
5. Sending commands to
6. Configuration registration.

Setting up HoneyWell N-1000 ACS connection

Setting up connection of
N1000 object. This object is created on the basis of
4
16 (normally closed resistive / dead
integration module do the following:
hardware on secured object (see reference documentation for
to Server.
Honeywell Systems Group
Video and Access Control Solutions
www.security.honeywell.com
Low-level protocol
RS-232
Features
25000 or 5000 cards
16 alarm inputs
8 relays
63 time zones
8 programmable card formans
integration module is performed in the following succession:
HoneyWell N-1000 ACS
points.
exits.
controller.
HoneyWell N-1000 ACS to
10 200
4
contacts)
to Intellect Server .
Intellect Server is carried out on the setting panel of
Computer object in Hardware
10 200
4 (with 24 resolution)
16 (normally closed / dead
contacts)
HoneyWell N-1000
HoneyWell
tab of System setting dialog box.