Table of Contents
Advertisement
1.
Go to setting panel of
2.
Set address of entrance group in the corresponding field ( ).
3.
Set checkboxes opposite those entrances that should be in the group ( ).
4.
In
Bypass
setting group set parameters of disconnection entrance group:
a.
In
Duration
b.
From corresponding dropdown list select time zone during which entrances of the group disconnect
automatically ( ).
5.
If it's necessary set time zone during which there will be no interactions connected with this group of entrances ( ).
6.
Click
Apply
in order to save changes ( ).
Setting up of entrances groups is completed.
Setting up HoneyWell N-1000 relay interlock
Setting up relay or relay groups interlocks is carried out on setting panel of
created on the basis of
Setting up relay or relay groups interlocks is carried out the following way:
1.
Go to setting panel of
14
N1000 zone
object.
field set period during which entrances of the group will be disconnected ( );
4
6
N1000 panel
object on
Hardware
N1000 interaction
1
N1000 interaction
tab of
System settings
object.
2
3
object. This object is
dialog box.
5
Hide quick links:
Advertisement
Table of Contents
