Controlling Honeywell N-1000 Exits Or Exit Group - Honeywell N-1000 Settings Manual

Description of feature menu commands of
Command of feature menu
Remove all options
Cancel TZ control
Accept alarm
Remove bypass
Cancel interactions
Bypass
Connection support
Repair TZ control
Bypass for time

Controlling HoneyWell N-1000 exits or exit group

Controlling exits or exit group of
0 exit or N1000 group
Description of feature menu commands of
Command of feature menu
Remove all options
Cancel TZ control
Disable
Cancel interactions
Enable
Connection support
18
N1000 entrance
Remove all options of entrance (entrance group)
Cancel controlling entrance (entrance group) using TZ
Take Alarm status and switch entrance (all entrances of the group) into normal state
Remove bypass of entrance (all entrances of the group)
Cancel interactions connected with this entrance (entrance group)
Enable bypass of entrance (entrance group)
Enable connection support of entrance (entrance group)
Repair controlling entrance (entrance group) using TZ
Enable bypass of entrance (entrance group) for some time
HoneyWell N-1000 ACS
objects.
N1000 exit
Remove all options of exit (exit group)
Cancel controlling exit (exit group) using TZ
Disable exit (all exits of the group)
Cancel interactions connected with this exit (exit group)
Enable exit (all exits of the group)
Enable connection support of exit (exit group)
and N1000 zone objects is given in the table.
Functionality
is carried out in Card interactive box using feature menu of
and N1000 group objects is given in the table.
Functionality
N100