Lapis ML610Q111 User Manual page 67

• QPB1 (bit 5)
QPB1 is the request flag for the input port PB1 pin interrupt (PB1INT).
QPB1
0 No request (initial value)
1 Request
• QPB2 (bit 6)
QPB2 is the request flag for the input port PB2 pin interrupt (PB2INT).
QPB2
0 No request (initial value)
1 Request
• QPB3 (bit 7)
QPB3 is the request flag for the input port PB3 pin interrupt (PB3INT).
QPB3
0 No request (initial value)
1 Request
Note:
When an interrupt is generated by the write instruction to the interrupt request register (IRQ1) or to the interrupt enable
register (IE1), the interrupt shift cycle starts after the next 1 instruction is executed.
FEUL610Q111
ML610Q111/ML610Q112 User's Manual
Description
Description
Description
Chapter 5 Interrupts (INTs)
5-14